Insights
Insights: guides for custom manufacturing
Practical guides on custom manufacturing in China: processes, materials, costs, OEM/ODM and how to move from prototype to production.
-

Engineering Guide
Snap-Fit Design for Plastic Parts: Cantilever, Annular and Torsion Snaps
Design snap fits that assemble easily and do not break: cantilever, annular and torsional snaps, strain limits, retention angles, molding considerations, prototyping limits and…
-

Manufacturing Guide
Fasteners and Hardware for Small-Batch Products
How to choose screws, nuts, standoffs and other hardware for small-batch products: standard sizes, materials and plating, clinch fasteners for sheet metal, BOM consolidation…
-

Manufacturing Guide
From Industrial Design to Engineering: Making the Handoff Work
How to move from industrial design concepts to manufacturable engineering: what designers should hand over, early manufacturing input, CMF, surfaces, design intent and avoiding…
-

Engineering Guide
Threads in Machined and Plastic Parts: Tapping, Inserts and Thread Forming
Choose the right thread for metal and plastic parts: tapped threads, helical coil inserts, heat-set and press-fit inserts, thread-forming screws, boss design rules and…
-

Manufacturing Guide
Writing a Product Requirements Document for a Hardware Product
How to write a hardware product requirements document that engineers and manufacturers can use: users and use cases, performance, environment, compliance, cost and volume…
-

Manufacturing Guide
Reading Inspection Reports: FAI, CMM Reports and Cpk
How to read the inspection reports suppliers send: first article inspection, ballooned drawings, CMM reports, measurement uncertainty, Cp and Cpk — and the warning…
-

Engineering Guide
What a Manufacturing Drawing Must Include (and What Suppliers Assume When It Does Not)
The elements every production drawing needs: title block, revision, material and finish, general tolerances, critical dimensions, notes and cosmetic requirements — and the assumptions…
-

Engineering Guide
Injection Molding Defects: Sink, Warpage, Flash, Short Shots — Causes and Fixes
The most common injection molding defects — sink marks, warpage, flash, short shots, weld lines, burns — what causes each, and whether the fix…
-

Engineering Guide
GD&T Basics for Buyers: Reading Position, Flatness and Profile Callouts
A practical introduction to geometric dimensioning and tolerancing for product teams and buyers: datums, feature control frames, position, flatness, profile, and how GD&T affects…
-

China Manufacturing
Supplier Audits in China: What to Check On Site
A practical supplier audit checklist for factories in China: legal entity, real capabilities, quality system and calibration, subcontracting, capacity, working conditions and the red…
-

Engineering Guide
Tolerance Stack-Up Analysis: Why Parts That Pass Inspection Still Do Not Fit
Why individually good parts can fail in assembly: worst-case and statistical tolerance stack-ups, how to build a stack-up loop, where to tighten tolerances and…
-

Manufacturing Guide
Engineering Change Management with Suppliers (ECN / ECO)
How to manage design changes with manufacturers: revision control, engineering change notices, effectivity and cut-in, inventory disposition, supplier confirmation and re-approval of samples.
Have a product or part to manufacture?
Send us your drawings, CAD files or a short description. An engineer will review your request and reply with questions or a quotation.