Insights
Materials
How to choose metals, plastics and electronic materials for custom manufactured parts.
-

Materials
Heat Treatment for Machined Steel Parts: Hardening, Tempering, Nitriding
What buyers should know about heat treating steel parts: through hardening, case hardening, induction hardening and nitriding, hardness specifications, distortion, machining sequence and verifying…
-

Materials
Finishes for Steel Parts: Zinc Plating, Nickel, Black Oxide and Passivation
How to choose and specify finishes for steel and stainless parts: zinc plating with passivates, zinc-nickel, electroless nickel, black oxide, powder coating and passivation…
-

Materials
Coatings for Plastic Parts: Soft-Touch, UV and Texture Paint
Soft-touch, UV-cured and texture paints for plastic parts: what each achieves, adhesion and pre-treatment, wear and chemical resistance testing, color and gloss control, and…
-

Materials
Transparent Plastic Parts: PC, PMMA, Light Pipes and Lenses
Designing clear plastic parts: choosing PC or PMMA, polish and cosmetic requirements, light pipe design for LEDs, scratch and chemical resistance, stress cracking and…
-

Materials
Glass-Filled Plastics: Stiffness Gains and the Trade-Offs
When glass-fiber-reinforced plastics such as PA-GF and PC-GF make sense: stiffness, strength and heat resistance gains versus warpage, anisotropic shrinkage, surface fibers, tool wear,…
-

Materials
Flame-Retardant Plastics and UL 94 Ratings: What Product Teams Need to Know
What UL 94 flammability ratings (HB, V-2, V-1, V-0, 5VA) mean, why thickness and color matter, how to verify a resin grade's listing, and…
-

Materials
Aluminum Extrusions for Enclosures and Frames
When to use custom or standard aluminum extrusions instead of machining from solid: die cost, profile design rules, tolerances, secondary machining, end caps and…
-

Materials
Silicone Rubber Parts: Compression Molding vs LSR
Compression molding vs liquid silicone rubber (LSR) injection: tooling, cycle time, precision, flash, Shore hardness, color matching, food-contact and skin-contact grades, and design tips…
-

Materials
Living Hinges and Plastic Hinges: Design, Materials and Molding
How living hinges work, why polypropylene is the usual material, hinge geometry, gate placement and flexing after molding, plus alternatives such as pin hinges…
-

Materials
Surface Finishes for Aluminum Parts: Anodizing, Powder Coating, Chromate and More
Aluminum finishes compared — Type II and Type III hard anodizing, powder coating, chromate conversion, bead blasting, brushing — with their effect on dimensions,…
-

Materials
Choosing Plastics for Enclosures: ABS, PC, PC-ABS, PA and ASA
How to pick an enclosure plastic: impact strength, temperature, UV and outdoor use, flame rating (UL 94), chemical resistance, cosmetics and molding behaviour —…
-

Materials
Aluminum vs Steel vs Stainless Steel for Machined Parts
How to choose between aluminum, carbon steel and stainless steel for machined parts: strength, weight, corrosion, machinability, finishing and cost — with common grades…
Have a product or part to manufacture?
Send us your drawings, CAD files or a short description. An engineer will review your request and reply with questions or a quotation.